Roland VR-3 - Page 13

13
MIDI Implementations
● Channel Pressure
Status 2nd Byte
———- ———
DnH vvH
* Following functions can be assigned using the MVC parameters.
• Transition time control.
• MASTER volume control. (This is out of the MVC spec and should be manually set in the VR-3 menu. )
• Output fade control. (This is out of the MVC spec and should be manually set in the VR-3 menu. )
• Transition type select. (This is out of the MVC spec and should be manually set in the VR-3 menu. )
● Pitch Bend Change
Status 2nd Byte 3rd Byte
———- ——— ———
EnH llH mmH
mm,ll = Pictch bend value : 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* Following functions can be assigned using the MVC parameters.
• Transition time control.
• MASTER volume control. (This is out of the MVC spec and should be manually set in the VR-3 menu. )
• Output fade control. (This is out of the MVC spec and should be manually set in the VR-3 menu. )
• Transition type select. (This is out of the MVC spec and should be manually set in the VR-3 menu. )