
Do you have a question about the Roland V-4EX and is the answer not in the manual?
| On/off switch | Yes |
|---|---|
| Product color | Black |
| Rack mounting | No |
| Output current | 2 A |
| Power source type | AC |
| Video resolutions | 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1366 x 768, 1400 x 1050, 1600 x 1200, 1920 x 1200 pixels |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, PAL |
| BNC input ports | 4 |
| Number of HDMI outputs | 2 |
| VGA (D-Sub) input ports | 1 |
| Display type | LCD |
| Display resolution | 320 x 240 pixels |
| Depth | 296 mm |
|---|---|
| Width | 225 mm |
| Height | 105 mm |
| Weight | 2600 g |
Details safety notices, symbols, and essential precautions for preventing hazards.
Provides guidelines for safe operation, proper placement, ventilation, cleaning, and handling.
Instructions for connecting the AC adapter and using the cord hook for secure cable management.
Details the procedure for turning the unit on/off and managing the automatic power-off function.
Identifies and explains the functions of the top panel controls and indicators.
Describes the various buttons, dials, and the transition section controls on the unit.
Details the rear panel's input/output connectors, power, and USB ports.
Instructions for connecting HDMI, Composite, and S-Video sources.
Steps to connect the V-4EX to a computer for streaming and supported OS.
Detailed procedure for connecting to a computer and output signal specifications.
Steps to enable HDCP for inputting protected content and understanding the HDCP indicator.
Guides on setting transition effects, filter/compositing effects, transformers, and BPM.
Step-by-step guide on using the video fader for A/B switching between sources.
Instructions for switching video sources using the built-in touch panel.
Using transformer buttons for cuts and BPM sync for automatic switching.
Addresses common problems such as no picture, color issues, fader unresponsiveness, and effect conflicts.
Loading...