Roland VS-540i - Starting the Print Operation

49
Chapter 3 Printing Chapter 3 Printing
3-4 Print Job Setting : Equipped with White Only

Click .
For [Media Type], select "Generic Clear
Film."

For [Print Quality], select either [High
Quality] or [Standard].
For [Mode], select the print mode.
W -> CMYKLcLmLk (v)
Inks are overprinted in the sequence of white and
then CMYKLcLmLk Color.
CMYKLcLmLk -> W (v)
Inks are overprinted in the sequence of CMYKLcLmLk
and then white Color.
Image of overprinting in the sequence of white and then CMYKLcLmLk Color
(Print Mode "W -> CMYKLcLmLk (v) ")
* The white data and the CMYKLcLmLk color data are actually printed simultaneously, but they are shown
here as separate layers in order to indicate the printing sequence.
The printed image
is to be seen from
this side (the print-
ed surface of the
nished results).
Transparent lm
White
CMYKLcLmLk
VS-640i_USE2_EN_R1.indb 49 2013/07/23 19:00:30