To Next PageTo Next Page
Need help?Do you have a question about the Roland VS-540 and is the answer not in the manual?
General| Maximum Print Width | 54 inches |
|---|---|
| Connectivity | USB, Ethernet |
| Print Technology | Piezo inkjet |
| Resolution | 1440 dpi |
| Media Thickness | Maximum 1.0 mm with liner |
| Media Roll Diameter | Maximum 210 mm |
| Media Roll Weight | Maximum 30 kg |
| Interface | USB 2.0, Ethernet |
| Power Requirements | AC 100 to 240 V ± 10%, 50/60 Hz |
| Ink Configuration | CMYK, Light Cyan, Light Magenta, White |
Details the various parts of the printer unit, including front and rear components.
Outlines the main menu structure and navigation flow of the printer's settings.
Provides critical safety warnings and precautions for operating the machine.
Offers essential advice for careful handling and operation of the precision device.
Explains the types of media used and essential preparation steps before loading.
Details the procedure for powering on the printer and its sleep mode feature.
Provides step-by-step instructions for loading both roll and sheet media correctly.
Guides users through configuring media settings for optimal printing output.
Covers procedures related to starting output, printing tests, and managing the cutting process.
Explains the correct procedure for powering down the printer after use.
Instructions on how to check ink levels and replace cartridges when they are empty.
Details daily maintenance tasks, including ink cartridge care and fluid disposal.
Provides instructions for daily cleaning of the printer's media path and rollers.
Explains the importance of print head care, including daily and periodic maintenance.
Offers solutions for print quality issues when normal cleaning does not resolve them.
Outlines periodic maintenance tasks recommended for more than monthly intervals.
Describes symptoms that indicate manual cleaning of the print head is required.
Provides troubleshooting steps for persistent dot drop-out issues not resolved by cleaning.
Instructions for replacing various consumable parts like wipers, blades, and knives.
Explains how to save and load custom settings for media and print configurations.
Details the media heating system's function, settings, and usage for ink adhesion.
Covers functions for correcting printing misalignment and improving print quality.
Provides guidance on adjusting settings for different media types and conditions.
Offers tips and procedures for optimizing cutting settings and quality.
Explains how to perform printing and cutting operations independently, including crop mark usage.
Details the usage of the optional media take-up system for managing media output.
Covers system reports, ink management, and media remaining display settings.
Explains settings for menu language, units, sleep mode, and system information.
Addresses common issues preventing the printer from starting or operating.
Explains why the media heating system might not warm up and how to resolve it.
Provides troubleshooting steps when the machine fails to cut media properly.
Offers solutions for issues affecting print or cut quality, such as coarse results.
Addresses problems related to inconsistent or uneven color output.
Explains how to prevent media soiling and issues related to print head contact.
Covers troubleshooting for misaligned or skewed cutting results.
Provides guidance on resolving media jams and preventing damage.
Addresses issues related to irregular or problematic media feeding.
Offers solutions for situations where the print head carriage stops moving.
Lists and explains common messages displayed on the machine's screen.
Describes various error messages and how to take action to resolve them.
Details the maximum printable and cuttable areas of the machine.
Provides information on blade types, force settings, offsets, and service life.
Indicates the positions of essential labels on the machine for identification and power requirements.
Lists comprehensive technical specifications for different models of the machine.
