Roland VS-540 - Printer Preparations; Making the Printer Settings and Loading Media

Chapter 2 Getting Ready
11
Chapter 2 Getting Ready
2-2 Printer Preparations
Making the Printer Settings and Loading Media
When Using Transparent Media
When you are using transparent media, make the necessary printing settings on the printer and load the
media accordingly.
Procedure

Press and make the following settings.
[EDGE DETECTION] to "DISABLE."

Load transparent media into the printer.
 When the media warps or partially oats, ensure a margin of about 200 mm from the leading edge of the
media to the printing- or cutting-start location.
 Be sure to use the media clamps when you load media.
When Using Media Other Than Transparent Media
Load the media using the method described in the User's Manual.