Roland XT-640 - Transport

 Transport of the Machine
 The machine can be transported in three different ways.
 For more details on how to transport the machine, refer to the service note.
 Be sure to observe the following points when transporting.
13. Transport
*1 During non-operation: Keep the machine at a temperature of 15 to 30˚C and relative humidity of
20 to 80%RH (no condensation).
with ink filled
with ink removed
(without HEAD WASH)
with ink removed
(with HEAD WASH)
Do not subject the machine
to impact.
Do not subject the machine
to impact.
Do not subject the machine
to impact.
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period.
*1
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period.
*1
Do not expose the machine
to temperatures exceeding
30ºC for a prolonged period.
*1
Turn on the main power SW
within 24 hours.
Perform FILL INK within the
day.
Perform FILL INK within three
days.
46/47