Roland XV-5050 - Setting Part Note Ranges

29
Playing Sounds
Quick Start
Setting the Note Range of Each Part
Now let’s change the settings so that Part 2 sounds in the C5–G9 range and Part 3
sounds in the C-1–B4 range.
First, make sure Performance “PB:029 Organ/Lead” is chosen.
1.
Press [EDIT] to make its indicator light.
2.
Press [ CURSOR] a few times to move the cursor to the upper line
of the display.
3.
Turn [VALUE] to choose “COMMON.”
4.
Press [CURSOR ] to move the cursor to the lower left of the
display.
5.
Turn [VALUE] to choose “Key Range Lower.”
6.
Press [ PART]/[PART ] to choose Part 2.
7.
Press [CURSOR ] to move the cursor to the lower right of the
display.
8.
Turn [VALUE] to choose “C5.”
9.
Press [ CURSOR] to move the cursor to the lower left of the
display.
10.
Turn [VALUE] to choose “Key Range Upper.”
11.
Press [PART ] to choose Part 3.
12.
Press [CURSOR ] to move the cursor to the lower right of the
display.
13.
Turn [VALUE] to choose “B4.”
14.
Press [EXIT] to return to the PERFORM PLAY screen.
Play your MIDI keyboard and notice how the Part’s ranges have changed.
fig.0-13
4, 7
12
1
3, 5, 8
10, 13
14
2
9
6
11
XV-5050_e.book 29 ページ ２００３年６月２７日 金曜日 午後３時１４分