Rollei Actioncam 310 - Time Lapse Mode; Burst Photo Mode

saved before the camera powers OFF.
PHOTO MODE
Photo
To capture a Photo, verify the camera is in
Photo mode. If the Photo icon on your camera's
LCD screen is not showing, press the Power/
Mode Button repeatedly until it appears.
To take a photo:
Press the Shutter/Select Button. The camera
will emit the camera shutter sound.
BURST PHOTO MODE
□ l | Burst Photo
To capture a Burst Photo series, verify the
camera is in Burst Photo mode. If the Burst
Photo icon on your camera's LCD screen is not
showing, press the Power/Mode Button
repeatedly until it appears. In Burst Photo
mode, your camera takes 3 photos in 1.5
seconds.
To take a Burst Photo series:
Press the Shutter/Select Button. The camera
will emit camera shutter sounds.
TIME LAPSE MODE
C|q Time Lapse
To capture a Time Lapse series, verify the
camera is in Time Lapse mode. If the Time
Lapse icon on your camera's LCD screen is not
showing, press the Power/Mode Button
repeatedly until it appears. In Time Lapse
mode, your camera captures a series of photos
at 2,3,5,10,20,30 or 60 second intervals.
To take Time Lapse:
Press the Shutter/Select Button. The camera
initiates countdown and emits the camera
shutter sound each time a Photo is taken.
QUICK MODES
To enter the Quick Modes menu
1. Verify the camera is in Camera modes.
2. Press and hold the Shutter/Select Button
forthree seconds.
3. Repeatedly press the Power/Mode Button