11
RolliBot RolliCool 310 Portable AC with Heater User Manual
Step 3. Attach the wheels (if needed) and roll
the unit into the desired room. In the moving
process, ensure that the unit is in an upright
position and the RolliCool is placed on a at
surface.
Step 4. Attach the included heat exhaust pipe
to the air vent on the back of the unit. Unfold
the pipe to the necessary length.
Step 5.Install the assembled kit into a gap between the window and the frame and push the
window nearly closed to secure it. Turn the screw head to tighten or loosen the screw fastener
and adjust the sections as needed.
To Next Page
Loading...
