rollibot M6 - Wet Mop

13RolliBot 2-in-1 Electric Mop
6.2 – Wet Mop
 Beforeusingthewetmop,poursomewaterintothewatertankerfirst.
1. Take off the cap on top of the water tank and pour some water into the tank. Cover
the cap after tank is full.
Water Tank
Cap
2. Press the power button once to turn on the mop. It will start in low-speed mode. Press
the power button again to cycle to a faster speed mode.
3. Press the spray button to spray water.
4. To stop, press the power button a third time.
Power/Speed
Button
Spray Water
Water Outlet