rollibot M6 - Specification; Troubleshooting

15RolliBot 2-in-1 Electric Mop
Section 8 : Specication
Power Supply Rechargeable
Input 100-240V AC 50-60Hz
Output 13.5V DC 1A
Battery Li-Ion 2.0AH,10.8V
Power
Low Speed: 19W
Highspeed:30W(drymoponwoodoor)
Charging time 2H±0.5H
Run time
Low speed: 50mins
Highspeed:40mins(drymoponwoodoor)
RPM
Low speed: 140±20RPM;
High speed: 190±30RPM
Capacity of the water tank 300ml
Spary water speed 150ml/min
Product size 1110mm (H) x 342mm (W) x 216mm (D)
Special functions
Controlled by AI, power shortage protection, fully charge
indication
N.W. 2.5Kgs
Section 9 : Troubleshooting
Please read this manual and check the following points carefully before bring the mop to
customer service.
Problem Possible Reason Possible solution
Run time is getting shorter
after being fully charged
Battery life issue
Please contact dealer to
replace battery
Indication light blinks rapidly
during normal operation
Battery power is low Recharge battery
Allfiveindicatorlights
blink rapidly during normal
operation
Overload protection
Check for dust lodged in
bottom of unit. Clean and
restart unit.
The 1, 2, 3 and 4 indicator
lights blink rapidly during
normal operation
Battery high temperature
protection
Turn off unit and leave off
for 30 minutes. Do not place
on charger. Restart after 30
minutes.
If the information in this section did not resolve your issue, please visit our website at www.
rollibot.com or contact customer support at 1-844-585-6295.