6
step 1.
417087
Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.
Insert a CONNECTOR SCREW (8S) into each HIDDEN CONNECTOR (5F).
Use your hammer to tap a HIDDEN CONNECTOR (5F) with SCREW into the BOTTOM SHELF (D2).
Repeat this step tapping two HIDDEN CONNECTORS (5F) with SCREWS into the SHELVES (B2 and C2).
(8S) x 3
connector screw
(5F) x 3
hidden connector
8S
5F
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
5F
D2
To Next Page
Loading...
