P
REFACE
748332-D Rosemount Analytical June 1997
P-1
NGA Non-Dispersive Infrared Analyzer
P
URPOSE
/S
AFETY
S
UMMARY
The purpose of this manual is to provide information concerning the components,
functions, installation and maintenance of this particular NGA 2000 module.
Some sections may describe equipment not used in your configuration. The user
should become thoroughly familiar with the operation of this module before operating
it. Read this instruction manual completely.
To avoid explosion, loss of life, personal injury and damage to this equipment
and on-site property, all personnel authorized to install, operate and service this
equipment should be thoroughly familiar with and strictly follow the instructions
in this manual. SAVE THESE INSTRUCTIONS.
If this equipment is used in a manner not specified in these instructions,
protective systems may be impaired.
DANGER
is used to indicate the presence of a hazard which
will
cause
severe
personal injury, death, or substantial property damage if the warning is ignored.
WARNING
is used to indicate the presence of a hazard which
can
cause
severe
personal injury, death, or substantial property damage if the warning is ignored.
CAUTION
is used to indicate the presence of a hazard which
will or can
cause
minor
personal injury or property damage if the warning is ignored.
NOTE
is used to indicate installation, operation or maintenance information which is
important but not hazard-related.
Operate this equipment only when covers are secured. Servicing requires
access to live parts which can cause death or serious injury. Refer servicing to
qualified personnel.
For safety and proper performance, this module must be connected to a
properly grounded three-wire source of electrical power.
WARNING: ELECTRICAL SHOCK HAZARD
To Next Page
Loading...
