P
REFACE
748332-D Rosemount Analytical June 1997
P-3
NGA Non-Dispersive Infrared Analyzer
Tampering with or unauthorized substitution of components may adversely
affect safety of this product. Use only factory approved components for repair.
This Analyzer Module may tip instrument over if it is pulled out too far and the
Platform is not properly supported.
If this Analyzer Module is used with a non-Rosemount Analytical power supply,
adding Rosemount Analytical PN 903341 Current Protector in series with the
24V positive power line will prevent over-voltage spiking and resultant fuse
blowing when powering up the instrument.
Note
Apply leak test liquid to cell or detectors only as a last resort.
CAUTION: PARTS INTEGRITY
CAUTION: OVERBALANCE HAZARD
WARNING: OVER-VOLTAGE SPIKING
To Next Page
Loading...
