Wireless N Adapter RNX-N180UB User Manual
Chapter 4 Configuration – Station Mode
The Wireless USB Adapter provides two modes: Station mode and Access
Point mode, the default is Station mode. You can select remote wireless AP to
connect to Internet in station mode. But in the Access Point mode, the wireless USB
adapter act as a wireless access point which the wireless USB Adapter can connect
to share an Internet connection with others.
Use the Wireless LAN Utility to check the link information, search for available
wireless networks, or create profiles that hold different configuration settings. You can
double-click the icon (Figure 0-1) on your desktop to run it. Another way to start the
Configuration Utility is to
click Start>Programs> 11n USB Wireless LAN Utility>
11n USB Wireless LAN Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility or
the Wireless Client Configuration.
Figure 0-1
4.1 General
The General tab (Figure 0-2) displays current basic wireless connection
information.
Figure 0-2
12
To Next Page
Loading...
Need help?
General
