Rosslare AC-Q41SB User Manual

Programming
AC-Q4x Series Installation and Programming Manual 33
To change the Open code:
1. Enter Programming mode.
2. Press 1 to enter Menu 1.
The left LED turns red.
3. Enter the new 4-digit Open code.
You hear three beeps.
The system returns to Normal mode.
5.4 Changing the Auxiliary Code
The Auxiliary code is mainly used as a method to quickly test the
Auxiliary relay during installation.
For security reasons, when the first user is added to the controller or
the open code is changed, the default auxiliary code is automatically
deleted; non-default codes are not be erased automatically.
• Auxiliary code does not function in Secure mode.
• Auxiliary code only works when the Auxiliary mode is 0, 1, 8 or 9.
• Wrong entries return the controller to Normal mode.
• Code 0000 erases and deactivates the auxiliary code.
• The default 4-digit factory setting for the auxiliary code is 0852.
To change the Auxiliary code:
1. Enter Programming mode.
2. Press 2 to enter Menu 2.
The left LED turns orange.
Orange
Green
Green
Green
Red Green
Green

Rosslare AC-Q41SB Specifications

General

Brand	Rosslare
Model	AC-Q41SB
Category	Keypad
Language	English