Rosslare AY-B91 0BT Series User Manual

AY-B91x0BT User Guide
4
1. Before Getting Started
1.1. Safety Notes
 Warning
Do not operate the terminal
with wet hands, and pay
attention not to let any liquid
enter inside the terminal.
→ Otherwise, malfunction
or electric shock may be
caused.
Keep the terminal away
from inflammables.
→ Otherwise, it may cause
a fire.
Do not disassemble, repair or
remodel the terminal at your
disposal.
→ Otherwise, it may cause
malfunction, electric shock, or
a fire.
Do not allow children to
touch the terminal
carelessly. → Otherwise, it
may cause safety accidents
of children or malfunction.
- Non-compliance of safety notes may cause death or serious injury for users.
 Cautions
Do not install the terminal in a
place exposed to direct
sunlight.
→ Otherwise, it may cause
malfunction, deformation and
discoloration.
Do not install the terminal
in humid or dusty places.
→ Otherwise, it may cause
malfunction.
Do not clean this terminal by
sprinkling water, nor wipe it
with benzene, thinner, and
alcohol.
→ Otherwise, it may cause
electric shock or a fire.
Keep the terminal away
from magnets.
→ Otherwise, it may cause
failure and malfunction.
Keep the fingerprint input
section clean.
→ Otherwise, the fingerprint
cannot be recognized
correctly.
Do not spray insecticides or
inflammables on the
terminal.
→ Otherwise, it may cause
deformation and
discoloration.
Keep the terminal away from
shock or sharp objects.
→ Otherwise, it may damage
the terminal and result in
malfunction.
Do not install the terminal
in a place where there is a
severe change in
temperature.
→ Otherwise, it may cause
malfunction.
- Non-compliance of safety notes may cause personal injury or property damage for users.
※ We are not responsible for any accidents and damage that may arise from non-compliance of the
information in this manual.

Rosslare AY-B91 0BT Series Specifications

General

Brand	Rosslare
Model	AY-B91 0BT Series
Category	IP Access Controllers
Language	English