rotai RT8900 - Leg Rest Hanger Assembly; Connecting Power Cable and Switching On

11
INSTALLATION METHOD
Put the Leg rest Hanger sleeve into the Leg rest Hanger. Attach the Leg rest Hanger onto the Leg
rest Rotation Shaft. Then attach a DK Circlip to the end of the Leg rest Rotation Shaft to hold the leg
rest in place, Zip the footrest and main chair together.
• Connect the power cable to the massage chair power socket (located at the power box on the
chair).
• Switch ON the power switch located at the back of the power box. Raise the backrest of the
chair to the fully upright position.
Step 5: Other Accessories
Power Cord
Power Cord Port
Power Switch
Leg Rest
Leg Rest Hanger
Leg Rest Rotation
DK Circlip