Rotary DS35 - Final Positioning of Platforms

44
Make sure the platforms or
scissors can not fall down when
you work under the platforms.
NP945 REV.-
21
11.7 Final Positioning of Platforms
1. Verify the platform bases are square and the
distance between the platforms is correct.
2. Verify platform bases are level, Fig. 22
3. Verify platform bases are level to each other,
Fig. 22.
4. Verify both platform bases are level front to rear,
Fig. 23.
5. Verify platforms are level, Fig. 24.
6. Verify platforms are level to each other, Fig. 24.
22
23