2
• The Owner/Employer shall ensure that lift operators are qualified and that they are
trained in the safe use and operation of the lift using the manufacturer’s operating
instructions; ALI/SM 10-1, ALI Lifting it Right safety manual; ALI-ST-10 ALI Safety
Tips card; ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection and Maintenance; ALI/WL Series, ALI
Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts, ALI/
LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts.
• The Owner/Employer shall establish procedures to periodically inspect the lift in
accordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer Shall ensure that lift inspectors are
qualified and that they are adequately trained in the inspection of the lift.
• The Owner/Employer shall establish procedures to periodically maintain the lift
in accordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer Shall ensure that lift maintenance
personnel are qualified and that they are adequately trained in the maintenance of
the lift.
• The Owner/Employer shall maintain the periodic inspection and maintenance re-
cords recommended by the manufacturer or ANSI/ALI ALOIM-2008, American Na-
tional Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance.
• The Owner/Employer shall display the lift manufacturer’s operating instructions; ALI/
SM 10-1, ALI Lifting it Right safety manual; ALI-ST-10 ALI Safety Tips card; ANSI/ALI
ALOIM-2008, American National Standard for Automotive Lifts-Safety Requirements
for Operation, Inspection and Maintenance; and in the case of frame engaging lifts,
ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging Lifts;
in a conspicuous location in the lift area convenient to the operator.
• The Owner/Employer shall provide necessary lockout/tagout means for energy
sources per ANSI Z244.1-1982 (R1993), Safety Requirements for the Lockout/Tagout
of Energy Sources, before beginning any lift repairs.
• The Owner/Employer shall not modify the lift in any manner without the prior written
consent of the manufacturer.
The Owner/Employer:
To Next Page
Loading...
Need help?
General
