Rotary SM30 User Manual

I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
SM30/RFL25
SM30 Capacity 30,000 lbs. (15,000 lbs. per axle)
140” Minimum Wheelbase
RFL25 Capacity 25,000 lbs. (12,500 lbs. per axle)
© July 2018 by Vehicle Service Group. CO10598.0 IN20490
Rev. J 7/24/2018
LP20460

Rotary SM30 Specifications

General

Brand	Rotary
Model	SM30
Category	Lifting Systems
Language	English

Summary

Required Clearances

Runway and Yoke Assembly

Cable Seating, Routing, and Yoke Feed

Illustrates proper cable seating, routing, and feeding through yoke ends for assembly.

Column Installation and Alignment

Column Placement and Alignment Studs

Details column placement, alignment stud usage, and gap maintenance for proper installation.

Dimension Verification and Anchoring

Concrete and Anchoring Requirements

Specifies minimum floor thickness, concrete strength, anchor embedment, and edge clearances.

Column Shimming and Anchoring

Power Unit and Electrical Setup

Mount Power Unit and Connect Hydraulics

Details mounting the power unit, connecting hydraulic hose, and orienting the elbow.

Electrical Connection Requirements

Fluid Filling and Air Supply

Fluid Filling and Bleeding

Air Supply Connection and Latch Adjustment

Final Testing and Operation

Final Adjustment and Latch Synchronization

Adjusting latches for synchronized locking engagement with vehicle loaded.

Operational Check and Safety

Ensuring proper function of all lift systems and safety checks.