To Next PageTo Next Page
Need help?Do you have a question about the Rotary SM14 and is the answer not in the manual?
General| Brand | Rotary |
|---|---|
| Model | SM14 |
| Category | Lifting Systems |
| Language | English |
Ensures lift operators are qualified and trained in safe use per manufacturer's instructions and industry standards.
Prohibits unauthorized persons from operating lifts; restricts customer access to the shop area.
Ensures no one is in front/behind lift during vehicle loading; checks rear tires clear ramps/chocks.
Prohibits persons on lift during raising/lowering; advises to stand clear of pinch points.
Warns against overloading lift; capacity is 14,000 lbs. per lift, 7,000 lbs. per axle.
Permit only trained personnel; familiarize with controls; observe safety labels.
Lower lift, ensure bay is clear, load vehicle carefully, use wheel chocks.
Push 'RAISE' button; release at desired height; ensure latches clear plate slots when lowering.
Raise lift high enough for latches to clear, actuate latch release, lower using handle.
Remove chocks, ensure area is clear, check lift level during lowering.
STOP if unfamiliar with procedures; permit only qualified personnel for maintenance.
Check bolts for tightness, clean runways, replace slack cable device springs.
