Rotary X14 - Replacement of the Piston Gaskets; Air Drainage

To Next Page

To Previous Page

7.3 Replacement of the piston gaskets

When a gasket needs changing, it is advisable to re-

place all the gaskets of the piston at the same time.

7.4 Air drainage

Piston:

- Turn the stem 3-4 complete runs.

Pump:

- Push the pedal into the RELEASE area

- At the same time press the valve positioned under the

area of the PUMP pedal.

- Do this for about 15 seconds.

Now the system should be primed and ready for opera-

tion.

Repeat the operation if necessary.