Rotary X14 - User Manual

20 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Table of Contents

General Description......................................................................................................... 3

Speciﬁcations ................................................................................................................... 4

Installation......................................................................................................................... 5

Maintenance Instructions .............................................................................................. 9

Safety Instructions........................................................................................................... 11

Operating Instructions .................................................................................................... 11

Maintenance Instructions .............................................................................................. 12

Trouble Shooting .............................................................................................................. 13

Parts Breakdown ............................................................................................................. 16

I

N

S

T

A

L

L

A

T

I

O

N

-

S

A

F

E

T

Y

-

O

P

E

R

A

T

I

O

N

-

M

A

I

N

T

E

N

A

N

C

E

I

N

S

T

A

L

L

A

T

I

O

N

-

S

A

F

E

T

Y

-

O

P

E

R

A

T

I

O

N

-

M

A

I

N

T

E

N

A

N

C

E

© June 2019 by Rotary Lift. All rights reserved. CO10951.3 IN20843

Rev. B 6/3/2019

X14/XA14 Rolling Jack

7,000 Lb. Capacity

Table of Contents

Questions and Answers

R
rharperAug 7, 2025
What to do if Rotary Jacks pump works but does not send oil?
- H
  huntbrianAug 7, 2025
  If the pump is running but not sending oil, first check if the oil level is low and top it up if needed. If the oil level is sufficient, the pump may not be primed. To resolve this, operate the pedal in the 'RELEASE' area while simultaneously using the air valve to start the motor. Bleed the air out and pressurize the tank, being cautious to maintain a maximum pressure of 0.5 Bar (7 P.S.I.). As a last resort, remove and clean the pump.
E
Elizabeth TuckerAug 16, 2025
Why Rotary Jacks have low capacity?
- P
  Peggy LambAug 16, 2025
  Low capacity in Rotary Jacks can stem from several causes. First, ensure the tank is adequately ventilated through the screw on the plug, aiming for a capacity of 250 Lt/minute. Also, check for insufficient air capacity and clean or replace the components as necessary. Hydraulic issues may also be the cause, so verify that the oil filter isn't blocked, check for air in the hydraulic circuit and ensure the ball of the suction valve functions correctly. Bleed air from the circuit. If necessary, add a copper washer or replace the coupling if the housing is worn.
M
Michael JonesAug 27, 2025
How to fix Rotary Jacks pump that does not start?
- W
  williamcunninghamAug 27, 2025
  If the Rotary Jacks pump does not start or stops prematurely, it could be due to a broken return spring, which requires replacement. Alternatively, there might be air loss, so inspect the piston seal and replace it if it's faulty.

Summary

General Description

Description of the Machine

Describes the hydraulic wheel free jack with a mechanical stop.

Purpose of the Machine

Explains the function of the wheel free jack for supporting and lifting vehicles.

Wheel Free Jack Controls

Lists the controls for the wheel free jack, A and B.

Main Technical Specifications

Lists key technical specifications like overload safety valve and sliding rollers.

After Unpacking

Moving to Site

Details the procedure for moving the machine using a fork-lift truck.

Disposal of the Packaging

Instructs on how to safely dispose of packaging materials.

Installation

Checking That All the Parts Are Present

Advises checking all parts are received before starting installation.

Checking the Minimum Requirements for the Place of Installation

Lists requirements for the installation area, like lighting and environment.

Pneumatic Connection

Specifies the air supply pressure and quality requirements for the connection.

Instructions for Installation

Details step-by-step installation procedures and diagrams.

Holder Brackets Adjustment

Explains how to adjust holder brackets using shims and checks.

First Start Up of the Machine

Describes the initial startup and testing process after installation.

Instructions for Use

Precautions for Use and Training of Operating Staff

Emphasizes trained personnel and lists safety precautions for operation.

Description of Controls

Explains the operation of various controls, including safety pins and pedals.

Description and Function of the Safety Components

Warning

General warning about unauthorized modifications and safety regulations.

Mechanical Stop Device

Describes the mechanical stop device for blocking accidental descent.

Device for Overload Protection

Explains the overload protection valve to prevent exceeding set capacity.

Using the Supplied Accessories

Maintenance

Changing the Oil

Details the procedure and frequency for changing hydraulic oil.

Cleaning the Valve and Filter

Explains how to clean the valve and filter, including the air filter.

Replacement of the Piston Gaskets

Advises replacing all piston gaskets when one needs changing.

Air Drainage

Provides instructions for priming the system after air drainage.

Safety Instructions

General Safety Guidelines

Summarizes critical safety rules for operators and equipment use.

Operating Instructions

Vehicle Loading and Positioning

Details steps for positioning the jack and vehicle before lifting.

Lifting and Lowering Procedures

Explains the process for raising and lowering the vehicle using the jack.

Maintenance Instructions

Routine Maintenance Checks

Outlines daily, monthly, and semi-annual inspection tasks for the equipment.

Fluid Level Checking Procedure

Step-by-step guide for checking and filling the hydraulic fluid reservoir.

Trouble Shooting

Pneumo-Hydraulic Diagram

Spare Parts Tables

How to Order Spare Parts

Provides essential information needed when ordering spare parts for the machine.

Spare Parts Summary

Summarizes the main machine units and refers to relevant tables for spare parts identification.

Rotary X14 Specifications

General

Brand	Rotary
Model	X14
Category	Jacks
Language	English