Rotel A11 - Specifications

14
A11 Stereo Integrated Amplier
Specications
Continuous Power Output 50 watts/ch
(20 - 20k Hz, < 0.03%, 8 ohms)
Total Harmonic Distortion (20 Hz - 20k Hz, 8 ohms) < 0.03%
Intermodulation Distortion (60 Hz : 7k Hz, 4:1) < 0.03%
Frequency Response
Phono Input 20 Hz - 20k Hz, ± 0.5 dB
Line Level Inputs 10 Hz - 100k Hz, ± 0.5 dB
Damping Factor (20 - 20,000 Hz, 8 ohms) 140
Input Sensitivity / Impedance
Phono Input 2.3 mV / 47k Ohms
Line Level Inputs 180 mV / 47k Ohms
Input Overload
Phono Input 50 mV
Line Level Inputs 4 V
Preamp Output / Impedance 1 V / 470 Ohms
Tone Controls - Bass / Treble ± 10 dB at 100 Hz / 10k Hz
Signal to Noise Ratio (A weighting)
Phono Input 85 dB
Line Level Inputs 100 dB
General
Power Requirements
USA 120V, 60 Hz
EC 230V, 50 Hz
Standby Power Consumption < 0.5W
Power Consumption 160 Watts
BTU (4 ohms, 1/8th power) 479 BTU/h
Dimensions (W, H, D) 430 x 93 x 345 mm
17” x 3
5
/8” x 13
1
/2”
Panel Height 80 mm / 3
1
/8”.
Weight (net) 6.85 kg, 15.1 lbs.
All specications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.
Tokyo, Japan.