To Next PageTo Next Page
Need help?Do you have a question about the Rotel RA-6000 and is the answer not in the manual?
General| Intermodulation Distortion | <0.03% (60Hz:7kHz, 4:1) |
|---|---|
| Input Sensitivity Line Level | 200mV |
| Input Impedance Line Level | 47kΩ |
| Input Impedance Digital Inputs | 75Ω |
| Input Impedance Phono | 47kΩ |
| Power Requirements | 120V, 60Hz |
| Standby Power Consumption | <0.5W |
| Power Output (4Ω) | 350W |
| Continuous Power Output | 200W/Ch (8Ω) |
| Frequency Response | 10Hz - 100kHz |
| S/N Ratio (IHF A-weighted) | 110dB |
| Channel Separation Line Level | >50dB |
| Channel Separation Phono | >85dB |
| Output Level | 1V |
| PC-USB | USB Audio Class 2.0 |
| Dimensions | 431 x 144 x 425 mm |
Warnings regarding exposure to moisture, water, and electrical hazards.
Instructions to prevent electric shock, including not opening the unit.
Explanation of symbols related to electrical shock and product information.
Details on pin assignments for Balanced Audio connectors (XLR).
Description of the Power Button for activating or putting the unit into standby mode.
Controls for Volume Knob, Headphone Output, and Speaker Selection.
Controls for selecting listening sources and navigating the setup menu.
Details on the Front USB Input for connecting Apple devices.
Ports for Bluetooth (aptX HD) and Network connection.
Connections for Digital Signal Inputs and PC-USB Input.
Includes Phono, Line Level, Balanced inputs and Subwoofer/Pre Outputs.
Connections for Speakers, EXT REM IN, 12V TRIGGER, and RS232.
Buttons for power, volume adjustment, and muting audio.
Buttons for selecting audio sources and navigating menus.
Buttons for playback control, repeat, and random track selection.
Buttons for display dimming and remote backlight.
Ensure all system components are turned off before making or changing connections.
Recommended to turn the volume control to minimum before powering on/off.
Rotel's founding by a family passionate about high-fidelity audio components.
Rotel engineers' approach to fine-tuning products with global components.
Rotel's efforts to minimize environmental impact with product design and manufacturing.
Explanation of Rotel's power output rating for true value of capability.
How speaker impedance affects power needs and amplifier design.
Introduction to the RA-6000's features, design, and musical enjoyment.
Guidance on optimal placement and maintaining airflow for heat dissipation.
Advice on managing cables to minimize noise and interference.
How to use the power switch and understand the power indicator light.
Using 12V trigger outputs to automatically turn other components on/off.
Guidance on connecting Phono, Line Level, and Balanced (XLR) sources.
Connecting digital sources like Coaxial and Optical PCM outputs.
Connecting a subwoofer via MONO SUB OUT or using Pre Out for other amplifiers.
Details on selecting speakers, wire types, and connection polarity.
Connecting headphones for private listening and managing speaker output.
Location of the remote sensor and functions of the front panel display.
How to adjust volume and left-right balance via front panel or remote.
Using Tone controls and the bypass function for direct audio signal.
Adjusting bass and treble levels, and using controls sparingly.
How to select listening sources using front panel or remote buttons.
Adjusting brightness for the front display and power indicator LEDs.
Connecting to computers via USB and integration via RS232.
Configuring IP addressing for network connection and software updates.
Explanation of thermal and over-current protection circuitry.
Configuration options including Tone Bypass, Bass, Treble, and Balance.
Enabling and customizing the Home Theater Bypass mode.
Setting a fixed volume level for specific inputs.
Selecting audio modes like MQA/24B or PCM 32B for PC-USB.
Configuring the unit to power on automatically when an audio signal is detected.
Settings for automatic power off and network-based power control.
Guidance for no sound, power indicator issues, and Bluetooth connection problems.
Instructions on what to do if the internal power fuse may have blown.
List of audio formats supported via USB and Bluetooth connections.
Detailed specifications for power output, frequency response, and distortion.
Details on input sensitivity, overload, and output levels.
Specifications for digital inputs, signal-to-noise ratio, and PC-USB capabilities.
Electrical requirements, power consumption, and physical dimensions.
