Rotel RB-870BX Owner's Manual

STEREO POWER AMPLIFIER
RB-870BX
owners,
manual
ENGLISH. 2
DEUTSCH. 5
FRAN9AIS. 8
B*IS. 1 1
WARNING
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE
Write your SERIAL NUMBER here.
The number is located near the name
plate on the rear panel.

Rotel RB-870BX Specifications

Power Output

continuous power output	100 watts per channel, min.
DIN power output	200 watts per channel (1kHz, 4 ohms, 1% THD)
bridged power	300 watts (mono) min. RMS driven into 8 ohms

Distortion

total harmonic distortion	No more than 0.03% (continuous rated power output)
intermodulation distortion	No more than 0.03% (60Hz: 7kHz = 4:1)
damping factor	180 (20 to 20, 000Hz, 8 ohms)

Electrical Specifications

peak current	50A (0.1 ohms, 10/isec, 1 pulse)
input sensitivity/impedance	1.0V/2 kohms
power requirement	120V/60Hz, 220W50Hz, 240V/50HZ or 120, 220, 240V/50Hz-60Hz (switchable)

Sound and Frequency

frequency response	4 to 100, 000 Hz, +0.5dB, -3.0dB
signal-to-noise ratio	110dB
speaker output	8 ohms nominal

Weight and Dimensions

dimensions	430 (W) x 109 (H) x 315 (D)mm
dimensions (inches)	16-15/16' x 4-7/32' x 12-13/32'
weight	9.4 kg / 20.68 lbs