Need help?Do you have a question about the Rotel RX-1052 and is the answer not in the manual?
General| Signal to Noise Ratio | 100dB (line) |
|---|---|
| Speaker load impedance | 4 - 16 ohms |
| Power Output | 100 W per channel (8 ohms) |
| Tuning range | FM: 87.5-108MHz, AM: 522-1611kHz |
| Frequency Response | 10Hz to 100kHz |
| Total Harmonic Distortion | 0.03% |
| Output | 1V (Pre out) |
To Next Page
