Rotel S14 - Specifications

16
S14 Integrated Network Streamer
Specications
Maximum Power Output Maximum Power Output 150 watts/ch, 4 ohms
Continuous Power OutputContinuous Power Output 80 watts/ch, 8 ohms
Total Harmonic DistortionTotal Harmonic Distortion < 0.04%
Intermodulation DistortionIntermodulation Distortion (60 Hz : 7k Hz, 4:1) < 0.03%
Frequency ResponseFrequency Response
Line Level Inputs 10 Hz - 100k Hz, ± 0.5 dB
Damping Factor Damping Factor (20 Hz – 20k Hz, 8 ohms) 400
Input Sensitivity / ImpedanceInput Sensitivity / Impedance
Line Level Inputs 200 mV / 47k Ohms
Input Overload Input Overload
Line Level Inputs 4.5 V
Tone Controls – Bass / TrebleTone Controls – Bass / Treble ±10 dB at 100Hz / 10k Hz
Signal to Noise RatioSignal to Noise Ratio (A weighting)
Line Level Inputs 100 dB
Digital Section Digital Section
Frequency ResponseFrequency Response 10Hz - 90k Hz (± 2dB, MAX)
Signal to Noise RatioSignal to Noise Ratio (A weighting) 98 dB
Input Sensitivity / ImpedanceInput Sensitivity / Impedance - 20 dBFS / 75 ohms
Digital InputsDigital Inputs SPDIF LPCM
(up to 192k Hz/24 bit)
PC-USBPC-USB USB Audio Class 2.0
(up to 384k Hz/24 bit)*
*Driver installation required
Support MQA and MQA Studio
(up to 384k Hz/24 bit)
GeneralGeneral
Power RequirementsPower Requirements
USA 120V, 60 Hz
EC 230V, 50 Hz
Standby Power ConsumptionStandby Power Consumption
Normal < 0.5 watts
Power ConsumptionPower Consumption 280 watts
BTUBTU (4 ohms, 1/8th power) 733 BTU/h
DimensionsDimensions (W, H, D) 430 x 93 x 345 mm
17” x 3
5
/8” x 13
1
/2”
Panel HeightPanel Height 80 mm / 3
1
/8”.
WeightWeight (net) 9.15 kg, 20.17 lbs.
All specications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.
Tokyo, Japan.
“Made for iPod,” and “Made for iPhone,” means that an electronic accessory
has been designed to connect specically to iPod or iPhone, respectively, and
has been certied by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Use of the Works with Apple badge means that an accessory has been
designed to work specically with the technology identied in the badge and
has been certied by the developer to meet Apple performance standards.
To control this AirPlay 2–enabled speaker, iOS 11.4 or later is required.
Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro, iPhone,
and Lightning are trademarks of Apple Inc., registered in the U.S. and
other countries.
‘MQA’ or ‘MQA Studio’ indicates that the product is decoding and playing
an MQA stream or le, and denotes provenance to ensure that the sound is
identical to that of the source material. ‘MQA Studio’ indicates it is playing
an MQA Studio le, which has either been approved in the studio by the
artist/producer or has been veried by the copyright owner.
‘OFS’ conrms that the product is receiving an MQA stream or le. This
delivers the nal unfold of the MQA le and displays the original sample rate.