Rotenso CONTROL Series - Operation; Operation Mode Setting; Operation Temperature Setting; To Start;Stop Operation

22
User manual
SAVA wired controller
EN
5.1. To start/stop operation
3. Date setting is complete and the time setting is ready after pressing TIMER or if nothing is pressed in 10
seconds.
4. Press + or − to set the current time. Press repeatedly to adjust the current time in 1 minute increments.
Press and hold to adjust the current time.
5. The setting is complete after pressing TIMER or if no button is pressed for 10 seconds.
ex.Monday AM 11:20
5. OPERATION
5.2. Operation mode setting
Press MODE to set the operation mode.
5.3. Operation temperature setting
Lower Raise
Press + or − to set the room temperature.
Indoor Setting Temperature Range:
62~86°F (17~30°C) / 62~88°F (17~31°C) (depending on models)).
Press the Power button.
WIRED CONTROLLER SUPPORT