Rotenso CONTROL Series - Fault Alarm Handing

32
User manual
SAVA wired controller
EN
• Press “CONFIRM” to set the airow.
0 means a stable airow volume, 1 to 4 means an increase in airow volume.
• Press “BACK” to nish the setting.
10. FAULT ALARM HANDING
If the system does not properly operate except in the aforementioned cases or the aforementioned
malfunctions are evident, investigate the system according to the following procedures.
Please check the indoor unit’s error display and review the owner’s manual if other error codes appear.
No. Malfunction and protection denition Display digital tube
1 Communication error between wired controller and indoor unit F0
2 The auto-ling panel is abnormal F1
WIRED CONTROLLER SUPPORT