Need help?Do you have a question about the rotork YT-1000 Series and is the answer not in the manual?
Essential guidance for users and manual handling.
Information on product warranty, coverage, and exclusions.
Critical safety instructions for explosion-proof installations and usage.
Describes the function and purpose of the Electro-Pneumatic Positioner.
Highlights the primary capabilities and operational features of the device.
Explains the meaning and significance of labels affixed to the product.
Decoding suffix symbols for YT-1000 linear positioner models.
Decoding suffix symbols for YT-1000 rotary positioner models.
Decoding suffix symbols for YT-1050 series positioner models.
Detailed technical data for YT-1000 and YT-1050 positioners.
Technical data for the Smart Position Transmitter option.
Technical data for the internal limit switch option.
Technical data for the external limit switch option.
Lists certifications applicable to both YT-1000 and YT-1050 models.
Lists certifications applicable exclusively to the YT-1000 model.
Lists certifications applicable exclusively to the YT-1050 model.
Certifications for SPTM-6V, YT-850, and YT-870 external options.
Exploded views and component identification for the YT-1000L.
Exploded views and component identification for the YT-1050L.
Exploded views and component identification for YT-1000R variants.
Provides dimensional drawings for various YT-1000L configurations.
Provides dimensional drawings for various YT-1000R configurations.
Provides dimensional drawings for YT-1050 models.
Explains the internal mechanism of the linear positioner.
Explains the internal mechanism of the rotary positioner.
Critical safety measures and tools required for installation.
Detailed steps for installing the linear positioner.
Detailed steps for installing the rotary positioner.
Requirements for clean, dry air supply and piping.
How to connect the positioner to single and double acting actuators.
Safety and connection procedures for flameproof power interfaces.
Connection procedures for intrinsic safety type circuits.
Wiring diagrams for SPTM and Limit Switch options.
Adjusting span and setting direct/reverse action.
Procedure for calibrating the zero point of the positioner.
Steps for setting the internal limit switches.
How to operate and adjust the Auto/Manual switch.
Installing orifices and resetting potentiometer values.
Instructions for replacing the span spring for split range functionality.
Guidelines for maintaining critical internal components like pilot valves and seals.
Diagnosing why the positioner doesn't respond to input signals.
Troubleshooting issues related to output pressure and air exhaustion.
Addressing hunting and incorrect actuator movement.
Resolving problems with low linearity and hysteresis.
General| Brand | rotork |
|---|---|
| Model | YT-1000 Series |
| Category | Valve Positioners |
| Language | English |
To Next Page
