ROVI X3 - Page 20

III
20
Standard Symbols and Indicators
Battery Gauge: Provides the state of charge of the battery and alerts the user to battery status.
• Steady:Noissues
• Flashingslowly:Chargethebatteryassoonaspossible
• Steppingup:Charginginprocess;drivelockoutactive.
Speed Indicator: Displays the current maximum speed setting.
Note: The color LCD also has a multi-segment speedometer that displays the current actual speed
of the power wheelchair.
Profile Number/Profile Name: Displays the currently selected drive profile number and drive pro-
lename.Upto5driveprolesareavailable,dependingonprogramming.
Clock: The color LCD can display the current time in either 12- or 24-hour display.
Other Symbols and Indicators:
In Focus: Alerts the user that a secondary control module currently has control of the power
wheelchair (for use with secondary controls such as a dual attendant module).
Speed Limit: When steady, this symbol alerts the user that the speed of the power wheelchair is be-
ing limited because of an alternate system (e.g., a raised seat actuator). When flashing, this symbol
alerts the user that the power wheelchair is under drive inhibit.
Latched: Displays when the control system is operating under a latched condition.
Restart: This symbol will flash when the control system needs to be restarted.
Fault: Alerts the user to a fault in the control system.
Motor Temperature: Alerts the user that the motors are overheating. The control system will auto-
matically reduce the power to the motors to avoid heat damage in this instance.
Control System Temperature: Alerts the user that the control system is overheating. The control