Need help?Do you have a question about the Royal Enfield Bullet Classic EFI and is the answer not in the manual?
General| Displacement | 346 cc |
|---|---|
| Fuel System | Electronic Fuel Injection (EFI) |
| Maximum Power RPM | 5250 rpm |
| Maximum Torque RPM | 4000 rpm |
| Compression Ratio | 8.5:1 |
| Ignition System | Digital Electronic Ignition |
| Clutch | Wet, Multi-Plate |
| Height | 1090 mm |
| Ground Clearance | 135 mm |
| Torque | 28 Nm |
| Transmission | 5-speed constant mesh |
| Brakes (Front) | 280 mm disc |
| Brakes (Rear) | 153 mm drum |
| Fuel Tank Capacity | 13.5 liters |
| Chassis Type | Single downtube |
| Front Suspension | Telescopic, 35 mm forks |
| Rear Suspension | Twin shock absorbers |
Specifies wear limits and service limits for critical engine components.
Outlines the schedule for regular inspections, adjustments, and replacements.
Details the engine oil circulation and lubrication paths.
Lists torque values for various engine fasteners during assembly.
Step-by-step guide for dismantling the engine from the frame.
Details the step-by-step process for assembling the engine.
Provides a guide for diagnosing and resolving EMS issues.
Lists torque values for chassis components like handle bar and frame mounts.
Details how to check starter coil, pulsar coil, and ignition coil.
Presents ignition, starting/charging, and complete wiring diagrams.
Troubleshooting steps for when the engine fails to start.
Troubleshooting for engine stalling after starting.
Troubleshooting steps for gradual engine stalling.
Resolving engine misfires and sudden shutdowns.
Addressing issues with acceleration, power, and overheating.
Diagnosing and fixing poor brake performance.
Addressing issues related to vehicle wobbling.
Diagnosing and resolving problems with the electric start system.
To Next Page