27
OPERATION OF CONTROLS
CLOCK SETTING
Royal Enfield Himalayan
NEVER attempt to operate the select or reset buttons while riding the motorcycle. Failure to do so may cause loss of
concentration and unstable riding, leading to a potential accident, resulting in serious injury to both rider and other road
WARNING
users, besides causing severe damage to the motorcycle.
Function
SELECT & MODE pressed
with No Speed input
Switch
Pressure
time (s)
Action
CLOCK
SETTING
MODE
>
3 s
In ignition key ‘ON’ position (when vehicle not running) Enters into clock setting
mode and hour digits starts to blink
SELECT < 1 s Hours value shall increment by 1 accordingly for no of press
SELECT > 3 s Hour value saved and minute digits starts to blink
SELECT < 1 s Minutes value will increase by 1 by each press of the “Select” button
SELECT > 3 s Minute value save and PM / AM digits starts to blink
SELECT < 1 s PM / AM is interchangeable by each press of the “Select” button
SELECT > 3 s PM / AM save and exit from clock set mode
NO ACTION 20 s Auto exit without saving changes and continue with previous setting
To Next Page
Loading...
Need help?
General
