30 Royal Enfield Himalayan
OPERATION OF CONTROLS
I. ABS SWITCH - ACTIVATION PROCEDURE
1. Ignition switch “ON”
condition
2. Vehicle stationary
3. Press ABS switch for (3-5 s)
Single Channel ABS mode is
activated (if, enabled): Rear
ABS function will not work.
Front wheel ABS will only work.
Procedure to Reset to Dual channel:
Ignition switch
reset*, vehicle will return to default dual channel ABS
mode.
CAUTION
If Single channel ABS mode enabled, ABS only controls
the front wheel. The rear wheel is not controlled by ABS
and may lock during braking maneuvers.
Dual Channel ABS mode (Default): ABS will work on both
wheels.
*Ignition key Reset:
Turning ignition switch from “OFF”
to “ON”.
To Next Page
Loading...
Need help?
General
