Royal Enfield Hunter 350 User Manual

Royal Eneld HUNTER 350
64
GEAR SHIFTING, RIDING AND STOPPING
 Warm up engine for 2 minutes - till idling is
consistent / stable.
GEAR SHIFT PATTERN
1 -- N -- 2 -- 3 -- 4 -- 5
 Press clutch lever towards the hand grip.
 Press gear pedal with toe towards down to engage
1
st
gear.
 Gently open throttle and release clutch
simultaneously. If clutch is released suddenly, the
engine may stall and cause a jerky start.
 It is recommended to use half clutch condition
when commuting in the city traffic condition along
(engine rpm around idling to 2,000 rpm) at 1
st
gear
condition. In other gears and higher rpm avoid
using half clutch which will proportionately reduce
CAUTION
The clutch must be fully disengaged before attempting
a gear shift. Failure to fully disengage the clutch may
cause a jerky start or stalling the engine besides causing
damage to transmission parts.
 Press the gear pedal
either upward with toe
or downward with heel
to engage 2
nd
gear.
 Follow the same
procedure for 3
rd
, 4
th
and 5
th
gear.
the clutch life. During acceleration / deceleration
disengage the clutch completely, shift the gear and
engage the clutch.

Royal Enfield Hunter 350 Specifications

General

Displacement	349 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic, 41mm Forks, 130mm Travel
Rear Suspension	Twin Tube Emulsion Shock Absorbers with 6-step Adjustable Preload
ABS	Dual Channel ABS
Fuel Tank Capacity	13 liters
Kerb Weight	181 kg
Wheelbase	1370 mm
Ground Clearance	150 mm
Seat Height	790 mm
Headlamp	Halogen
Tail Lamp	LED
Max Power	20.2 bhp @ 6100 rpm
Max Torque	27 Nm @ 4, 000 rpm
Transmission	5-speed
Front Brake	300mm disc, twin-piston floating caliper
Rear Brake	270 mm Disc with Single Piston Floating Caliper
Engine Type	Single Cylinder, 4 Stroke
Instrument Console	Analog-digital