EasyManuals Logo

Royal Enfield Meteor 350 2023 User Manual

Royal Enfield Meteor 350 2023
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Royal Eneld Meteor 350
97
WASHING PROCEDURE
Use lukewarm water and mild detergent on the
painted components to remove dirt, etc.
Clean motorcycle thoroughly with plain water to
remove the detergent.
Never spray water towards bottom side of instrument
cluster directly to avoid water entry through breather
holes.
If possible, use compressed air and blow off water par-
ticles from the obscure areas of the motorcycle, elec-
trical connections etc.
Once the motorcycle has been ridden in salty
conditions (i.e. during winter in places where road salt
is used) or near coastal areas it is recommended to
wash your motorcycle with cold water after the ride to
prevent corrosion or rust build-up. Please do not use
warm water for washing as it may damage the motor-
cycle due to chemical reaction with the salt. After
washing process once the motorcycle is completely
dry it is recommended to apply anti-corrosion spray
on all the metal and chrome plated areas to protect
the parts from corrosion.
It is recommended not to apply the anti-corrosion
spray on the brake discs.
Do not use petrol, brake oil or other flammable
liquids to clean or wash on electronic parts.
The parts chosen using motorcycle configurator
should not be washed with soap or chemical, use only
with plain water.
No direct jet at the edges of decal, electrical parts,
coupler joints, silencer tail pipe, radiator lubrica-
tion points like steering cone kit, brake pedal, wheel
bearings, chain, brake cam & swing arm bushes to be
washed in spray mode only (not in jet mode).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Royal Enfield Meteor 350 2023 and is the answer not in the manual?

Royal Enfield Meteor 350 2023 Specifications

General IconGeneral
Engine TypeSingle Cylinder, 4 Stroke, Air-Oil Cooled
Displacement349 cc
Max Power20.2 bhp @ 6100 rpm
Max Torque27 Nm @ 4000 rpm
Transmission5-speed constant mesh
Fuel SystemElectronic Fuel Injection (EFI)
Front SuspensionTelescopic, 41mm forks, 130mm travel
Fuel Tank Capacity15 liters
Kerb Weight191 kg
Seat Height765 mm
Tyre Size (Front)100/90 - 19
Tyre Size (Rear)140/70 - 17
Ground Clearance170 mm
Wheelbase1400 mm
Rear SuspensionTwin shock absorbers with 6-step adjustable preload
Front Brake300mm Disc, Twin Piston Floating Caliper
Rear Brake270mm Disc, Single Piston Floating Caliper
ABSDual Channel ABS

Related product manuals