Royal Enfield Meteor 350 2023 User Manual

Royal Eneld Meteor 350
96
WASHING PROCEDURE
PRECAUTIONS
 Remove ignition key and seal the ignition key barrel
slot using adhesive tape.
 Please remove tool kit and other relevant
documents if any inside the side panels before
proceeding for washing of the motorcycle.
 Cover the silencer tail pipe, horn and control
switches with suitable plastic bags and tie if firmly
to prevent water entry.
 Wash the motorcycle only when the engine is in
cold condition.
 Do not remove side panels while washing to avoid
water entry.
 Brush engine area with a recommend non corrosive
solvent to remove dirt or grease.
 Use low pressure water jet to clean.
 Never spray water with great force on head lamp,
speedometer, tripper, flasher lights, front and
rear wheel hubs, electrical connections and wires,
control cables, spark plug, battery, ABS ECU, EMS
ECU, side mirrors, steering stem etc.
 Do not use high pressure washers or steam jet
cleaners near the seal of headstock bearing or
steering stem bearing, seal of wheel bearing, brake
calipers, air intakes & exhaust outlets.
 Do not apply any corrosive solvent on painted
surfaces or rubber parts.

Royal Enfield Meteor 350 2023 Specifications

General

Engine Type	Single Cylinder, 4 Stroke, Air-Oil Cooled
Displacement	349 cc
Max Power	20.2 bhp @ 6100 rpm
Max Torque	27 Nm @ 4000 rpm
Transmission	5-speed constant mesh
Fuel System	Electronic Fuel Injection (EFI)
Front Suspension	Telescopic, 41mm forks, 130mm travel
Fuel Tank Capacity	15 liters
Kerb Weight	191 kg
Seat Height	765 mm
Tyre Size (Front)	100/90 - 19
Tyre Size (Rear)	140/70 - 17
Ground Clearance	170 mm
Wheelbase	1400 mm
Rear Suspension	Twin shock absorbers with 6-step adjustable preload
Front Brake	300mm Disc, Twin Piston Floating Caliper
Rear Brake	270mm Disc, Single Piston Floating Caliper
ABS	Dual Channel ABS