Royal Enfield Meteor 350 User Manual

Royal Eneld Meteor
75
WASHING PROCEDURE
 Use lukewarm water and mild detergent on the
painted components to remove dirt, etc.
 Clean motorcycle thoroughly with plain water to
remove the detergent.
 Never spray water towards bottom side of
instrument cluster directly to avoid water entry
through breather holes.
 If possible, use compressed air and blow off water
particles from the obscure areas of the motorcycle,
electrical connections etc.
 Once the motorcycle has been ridden in salty
conditions (i.e. during winter in places where road
salt is used) or near coastal areas it is recommended
to wash your motorcycle with cold water after the
ride to prevent corrosion or rust build-up. Please do
not use warm water for washing as it may damage
the motorcycle due to chemical reaction with the
salt. After washing process once the motorcycle is
completely dry it is recommended to apply anti-
corrosion spray on all the metal and chrome plated
areas to protect the parts from corrosion.
 It is recommended not to apply the anti-corrosion
spray on the brake discs.
 Do not use petrol, brake oil or other flammable
liquids to clean or wash on electronic parts.
 The parts chosen using motorcycle configurator
should not be washed with soap or chemical, use
only with plain water.

Royal Enfield Meteor 350 Specifications

General

Displacement	349 cc
Max Power	20.2 bhp @ 6100 rpm
Max Torque	27 Nm @ 4000 rpm
Transmission	5-speed constant mesh
Fuel Tank Capacity	15 liters
Front Suspension	Telescopic, 41 mm Forks, 130 mm Travel
Rear Suspension	Twin Tube Emulsion Shock Absorbers with 6-step Adjustable Preload
Kerb Weight	191 kg
Seat Height	765 mm
Fuel System	Electronic Fuel Injection
Tyre Size (Front)	100/90 - 19
Tyre Size (Rear)	140/70 - 17
Ground Clearance	170 mm
Wheelbase	1400 mm
Engine Type	Single Cylinder, 4-Stroke, Air-Oil Cooled
Front Brake	300 mm Disc with Twin Piston Floating Caliper
Rear Brake	270 mm Disc with Single Piston Floating Caliper
ABS	Dual Channel ABS