Royal Enfield Meteor 350 User Manual

Royal Eneld Meteor
53
GEAR SHIFTING, RIDING AND STOPPING
 Warm up engine for 2 minutes - till idling is
consistent / stable.
GEAR SHIFT PATTERN
1 -- N -- 2 -- 3 -- 4 -- 5
 Press clutch lever towards the hand grip.
 Press gear pedal with toe towards down to engage
1
st
gear.
 Gently open throttle and release clutch
simultaneously. If clutch is released suddenly, the
engine may stall and cause a jerky start.
 It is recommended to use half clutch condition
when commuting in the city traffic condition along
(Engine rpm around idling to 2,000 rpm) at 1
st
gear
condition. In other gears and higher rpm avoid
using half clutch which will proportionately reduce
CAUTION
The clutch must be fully disengaged before attempting
a gear shift. Failure to fully disengage the clutch may
cause a jerky start or stalling the engine besides causing
damage to transmission parts.
 Press the gear pedal
either upward with toe
or downward with heel
to engage 2
nd
gear.
 Follow the same
procedure for 3
rd
, 4
th
and 5
th
gear.
the clutch life. During acceleration / deceleration
disengage the clutch completely, shift the gear and
engage the clutch.

Royal Enfield Meteor 350 Specifications

General

Displacement	349 cc
Max Power	20.2 bhp @ 6100 rpm
Max Torque	27 Nm @ 4000 rpm
Transmission	5-speed constant mesh
Fuel Tank Capacity	15 liters
Front Suspension	Telescopic, 41 mm Forks, 130 mm Travel
Rear Suspension	Twin Tube Emulsion Shock Absorbers with 6-step Adjustable Preload
Kerb Weight	191 kg
Seat Height	765 mm
Fuel System	Electronic Fuel Injection
Tyre Size (Front)	100/90 - 19
Tyre Size (Rear)	140/70 - 17
Ground Clearance	170 mm
Wheelbase	1400 mm
Engine Type	Single Cylinder, 4-Stroke, Air-Oil Cooled
Front Brake	300 mm Disc with Twin Piston Floating Caliper
Rear Brake	270 mm Disc with Single Piston Floating Caliper
ABS	Dual Channel ABS