Royal Enfield Meteor 350 User Manual

Royal Eneld Meteor
74
WASHING PROCEDURE
PRECAUTIONS
 Remove ignition key and seal the ignition key barrel
slot using adhesive tape.
 Please remove tool kit, first aid kit and other
relevant documents if any inside the right side
panel before proceeding for washing of the
motorcycle.
 Cover the silencer tail pipe, horn and control
switches with suitable plastic bags and tie if firmly
to prevent water entry.
 Wash the motorcycle only when the engine is in
cold condition.
 Do not remove side panel while washing to avoid
water entry.
 Brush engine area with a recommend non corrosive
solvent to remove dirt or grease.
 Use low pressure water jet to clean.
 Never spray water with great force on head lamp,
meter / cluster unit, flasher lights, front and rear
wheel hubs, electrical connections and wires,
control cables, EFI components, spark plug,
battery, side panels.
 Do not use high pressure washers or steam jet
cleaners near the seal of headstock bearing or
steering stem bearing, seal of wheel bearing, brake
calipers, air intakes & exhaust outlets.
 Do not apply any corrosive solvent on painted
surfaces or rubber parts.

Royal Enfield Meteor 350 Specifications

General

Displacement	349 cc
Max Power	20.2 bhp @ 6100 rpm
Max Torque	27 Nm @ 4000 rpm
Transmission	5-speed constant mesh
Fuel Tank Capacity	15 liters
Front Suspension	Telescopic, 41 mm Forks, 130 mm Travel
Rear Suspension	Twin Tube Emulsion Shock Absorbers with 6-step Adjustable Preload
Kerb Weight	191 kg
Seat Height	765 mm
Fuel System	Electronic Fuel Injection
Tyre Size (Front)	100/90 - 19
Tyre Size (Rear)	140/70 - 17
Ground Clearance	170 mm
Wheelbase	1400 mm
Engine Type	Single Cylinder, 4-Stroke, Air-Oil Cooled
Front Brake	300 mm Disc with Twin Piston Floating Caliper
Rear Brake	270 mm Disc with Single Piston Floating Caliper
ABS	Dual Channel ABS