Royal Enfield SPRING FRAME O.H.V. 250cc CLIPPER 1954 User Manual

ROYAL ENFIELD WORKSHOP MANUAL
Contents
SECTION A3 ENGINE DATA
SECTION B3 ENGINE SPECIFICATION
SECTION C3 SERVICE WITH ENGINE IN FRAME
SECTION D3 SERVICE WITH ENGINE REMOVED
SECTION E2 GEARBOX AND CLUTCH
SECTION Fl CARBURETTER, STANDARD NEEDLE TYPE
SECTION F2 CARBURETTER, MONOBLOC
SECTION G2c A.C. LIGHTING SYSTEM (MILLER)
SECTION G2d A.C. LIGHTING SYSTEM (LUCAS)
SECTION G4a BATTERY USED WITH MILLER
SECTION G4b BATTERY USED WITH LUCAS
SECTION G5b LAMPS, MILLER
SECTION G5c LAMPS, LUCAS
SECTION H1 FRAME
SECTION J2 FRONT FORK
SECTION K2 FRONT WHEEL
SECTION L3 REAR WHEEL
SECTION M3 SPECIAL TOOLS
www.hitchcocksmotorcycles.com

Royal Enfield SPRING FRAME O.H.V. 250cc CLIPPER 1954 Specifications

General

Displacement	248cc
Compression Ratio	6.5:1
Ignition	Magneto
Frame Type	Spring frame
Suspension Front	Telescopic forks
Suspension Rear	Rigid
Brakes Front	Drum
Brakes Rear	Drum
Engine Type	Single cylinder, overhead valve (OHV)
Transmission	4-speed
Top Speed	70 mph
Wheelbase	1350 mm
Weight	137 kg (302 lbs)
Fuel Capacity	3.5 gallons