40
PLU REPORT
__________________________________________________________________
PLU Reports can be taken in either the X or Z position. Remember, if the PLU Report is taken in the Z position, the total will be
reset to zero.
1. Move the Control Switch to the "X" or "Z" position as desired.
2. If a security code has been assigned, enter the security code and press the [CHARGE] key. If no security code has
been programmed, continue with Step #3.
3. Press the [PLU] key.
4. The PLU Report will print.
___________________________
_ _
DATE _________ 11·20·98 _
_ _
_ 002 Z _
PLU NUMBER ________ 01 _
_ 001 ______________ SALES COUNTER
_ 1·00 ______________ SALES TOTAL
_ 02 _
_ 002 _
_ 4·00 _
_ 5·00 TA _________ ALL PLU SALES TOTAL
_ _
_ 13-19 026 _
___________________________
To Next Page
Loading...
