RS 500 - Default Chapter; Table of Contents

2
CONTENTS
1. INTRODUCTION
2. SPECIFICATIONS AND DRAWINGS
3. SAFETY INFORMATION
3.1 Design Category
3.2 Loading
3.3 Safety Equipment
3.4 Capsize Recovery
3.5 Air Tank
3.6 Man Overboard Prevention and Recovery
3.7 Use of an Outboard Engine
3.8 Towing, Anchoring, Mooring and Trailing
4. COMMISSIONING
4.1 Preparation
4.2 Unpacking
4.3 Rigging the Mast
4.4 Stepping the Mast
4.5 Rigging the Spinnaker Halyard
4.6 Rigging the Boom
4.7 Hoisting the Jib
4.8 The Rudder
4.9 Hoisting the Mainsail
4.10 Rigging the Spinnaker
4.11 Completion
5. SAILING HINTS
5.1 Introduction
5.2 Launching
5.3 Leaving the beach
5.4 Sailing Close-Hauled and Tacking
5.5 Downwind and Gybing
5.6 Using the Spinnaker
5.7 Reefing