1. Lift the boom and push the gooseneck onto the gooseneck collar on the
mast. Rest the other end of the boom on the transom.
2. Attach the mainsheet block with the inglefield clip to the block on the
bridle at the transom.
3. Take the mainsheet from the rope pack. Lead one end of the mainsheet
through the mainsheet block on the deck of the boat. Lead the end of
the mainsheet through the block near the kicker cascade on the bottom
of the boom, from front to back.
4. Lead the end of the mainsheet through the webbing strap on the boom,
and through the block at the end of the boom.
5. Thread the end of the mainsheet through the block on the mainsheet
bridle, and back up to the block at the end of the boom.
To Next Page
Loading...
