3. COMMISSIONING
3.1 Preparation
Your RS QUBA comes complete with all the components necessary to take the boat
sailing.
Whilst your RS QUBA has been carefully prepared, it is important that new owners
should check that shackles and knots are tight. This is especially important when the
boat is new, as travelling can loosen seemingly tight fittings and knots. It is important
to check such items prior to sailing regularly.
3.2 Unpacking
Having unpacked your RS QUBA, you should check that you have all of the items
listed below before throwing away any of the packaging, as there may be some small
items still wrapped.
• 1 x RS RS QUBA hull
• 1 x mast style as ordered
• 1 x boom
• 1 x Foil pack consisting
1 x rudder, rudder stock, and tiller extension
I x daggerboard
• 1 x mainsail (Sport or Pro)
• 1 x rope pack – consisting of:
1 x mainsheet
1 x daggerboard Retaining elastic
1 x Plastic clip for above
1 x downhaul
1 x Pulley on a hook for downhaul
1 x kicking cascade
Take care when using a knife or other sharp object to cut through
packaging containing parts – you may damage the contents!
To Next Page
Loading...
