To assemble the Tracked mast:
1. Join the mast by inserting the mast lower section into the mast top section.
2. Push the mast lower section in until it butts up against the mast top section.
3. Take the main halyard from the rope pack.
4. Lead the end of the main halyard through the back of the head sheave at the top
of the mast, from bottom to top.
5. Pull the main halyard through so that both ends are at the bottom of the mast, by
the gooseneck.
6. Take the end of the main halyard that is up against the mast track, and thread it
back into the sail track and out through the oblong hole in the mast, just above the
main halyard cleat.
To Next Page
Loading...
