EP Series User Manual
3
1.3. Electrical index
Table 1-1 Electrical index
Control signal breakover current
Under-voltage protection point
Over-voltage protection point
Driver initialization time
1.4. Safety instructions
The transportation, installation, use or maintenance of this product must be
carried out by persons with professional qualifications and familiar with the
above operations.
In order to minimize potential safety hazards, you should comply with all local
and national safety regulations when using this device. Different regions have
different safety regulations. You should ensure that the installation and use of
the device conform to your region. specification.
System errors may also cause equipment damage or personal injury. We do
not warrant that this product is suitable for your particular application, nor can
we assume responsibility for the reliability of your system design.
Be sure to read all relevant documents before installation and use. Improper
use may cause equipment damage or personal injury. Please strictly abide by
the relevant technical requirements during installation. Be sure to confirm the
grounding of each device in the system. Ungrounded systems cannot
guarantee electrical safety.
Some components inside this product may be damaged by external static
electricity. Operators should ensure that they are free of static electricity before
touching the product, and avoid touching objects that are prone to static
electricity (chemical fibers, plastic films, etc.).
If your equipment is placed in the control cabinet, please close the cover or
door of the control cabinet during operation, otherwise it may cause equipment
damage or personal injury.
It is strictly forbidden to hot-plug the cable when the system is running. The arc
generated by the hot-plug may cause harm to operators and equipment.
To Next Page
Loading...
Need help?
General
