Need help?Do you have a question about the Rubbermaid 3747 and is the answer not in the manual?
Choose a level site with good drainage for optimal shed function.
Check all parts are present and begin assembly by joining rear pieces.
Angle side panels and insert floor, using a mallet if needed.
Attach doors by aligning pins and snap points, then install roof supports.
Periodically inspect for proper assembly and level ground; clean gently.
Secure the shed to immovable objects or ground using provided areas.
Do not store hot yard equipment, grills, or other hot materials inside.
Add shelves using standard lumber cut to fit molded brackets, with clipped corners facing back.
Choose a level site with good drainage for optimal shed function.
Check all parts are present and begin assembly by joining rear pieces.
Angle side panels and insert floor, using a mallet if needed.
Attach doors by aligning pins and snap points, then install roof supports.
Periodically inspect for proper assembly and level ground; clean gently.
Secure the shed to immovable objects or ground using provided areas.
Do not store hot yard equipment, grills, or other hot materials inside.
Add shelves using standard lumber cut to fit molded brackets, with clipped corners facing back.
General| Brand | Rubbermaid |
|---|---|
| Model Number | 3747 |
| Material | Resin |
| Weather Resistant | Yes |
| Color | Brown |
| Shape | Rectangular |
| Lid Type | Hinged |
| Lockable | Yes |
| Assembly Required | Yes |
To Next Page
